Android Inventory Scanner

Android Handheld LogiScan-1700
Android Handheld LogiScan-1700/Advarics, perspective
Android Handheld LogiScan-1700/Advarics, Side View
Android Handheld LogiScan-1700/Advarics, Back
Android Handheld LogiScan-1700/Advarics in Cradle

LogiScan-1710/Advarics

Advarics-compatible Inventory Scanner with Android 6.0

With this Android-based mobile computer, a lightweight, powerful and ergonomic handheld Android operating system is available for inventory with the Advarics merchandise management system. Data can be collected for the following operations:

  • Inventory
  • Rebooking
  • Price Reduction
  • Returns
  • Goods Receipt

The collected data is provided in Advarics-compatible data format using the Windows software MTPWin.

For inquiries please use the form at the bottom of this page.

  • Reader-1D
  • Reader-2D
  • WLAN
  • GPRS
  • USB
  • Bluetooth
  • GPS
  • Camera
  • NFC
  • LTE-4G
  • IP67
Dimension, Weight164,2 x 78,8 x 17,0 mm (L x W x H), 288 g
Display5,2 inch, high resolution (1920 x 1080)
Touch PanelRobust, capacitive Touch Panel, tolerates the operation with gloves and wet hands
Keyboard4 front keys, 1 power key, 2 scan keys, 1 multi function keys
Batteryrechargeable Li-Ion battery, 5000 mAh
Extension Slots2 PSAM Slots, 1 SIM Slot, 1 Slot for SIM or TF Card
AudioSpeaker, 2 microphones
InterfacesUSB2.0 Type-C, OTG
SensorsGravity sensor, light sensor, proximity sensor, vibration motor
CPU, RAM, MemoryCortex-A53 1.3 GHz Quad-Core, 2 GB RAM, 16 GB ROM, with Micro-SD by max. 32 GB expandable
Operating System, SDK, Language, ToolAndroid 6.0, Software Development Kit, Java, Android Studio
WLANIEEE802.11 a/b/g/n, 2,4 GHz/5 GHz Dual-Band, internal antenna
WWAN & Sprache2G: 850/900/1800/1900 MHz, 3G: 850/900/1900/2100 Mhz, 4G: B1, B3, B5, B7, B8, B20, B40
WPANBluetooth 4.0, BLE
GPSPS/AGPS, GLONASS, BeiDou, internal antenna
CameraRear: 13 Megapixel, autofocus, with flash, front: 5 Megapixel (optional)
1D/2D Imager (optional)ZEBRA SE4750, all common 1D symbologies and following 2D codes: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
NFC13,56 MHz, protocol: ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc., Tags: M1 card (S50, S70), CPU card, NFC tags, etc.. range: 2 - 4 cm
Environmental ConditionsOperating temperature -20 to 50° C, storing temperature -40 to 70° C, relative humidity 5 bis 95%, not condensing
ESD±8 kV air discharge, ±4 kV conductive discharge
Drop SpecificationMultiple 1.8 m/5.9 ft drops (at least 20 times) to the concrete across the operating temperature range. 1000 x 0.5 m/1.6 ft falls at room temperature
Protection ClassIP67
LogiScan-1500 Schutztasche ohne Verschlussklappe
  • Robust
  • Removeable cover flap (Art. No. 00000312)
  • Portable at belt or with shoulder belt (Art. No. 00000350)
  • Dimensions: 22x11x7 cm (HxWxD)
  • Art. No. 00000320
LogiScan-1710 Charging Cradle
  • Charging the LogiScan-1710 Battery
  • Art. No. 30900035
AC Adapter

Art. No. 30900021

General Downloads
Android Apps
Application Development
Communication Software
  • MTPWin

    MTPWin provides functions for configuration / synchronization of mobile android-based data entry devices of the series LogiScan with a Windows PC. This requires the integration of MTPWin functionality in the corresponding Android data acquisition app.

Barcodes Android-based LogiScan LogiScan-600/800/1100

We want to introduce barcode recognition in our company. Which barcode type should we choose?

The different barcode types differ in some cases substantially in terms of the character size, the information density, the max. Number of codable characters and security. While 1D barcodes can be read by almost all barcode readers (1D and 2D barcode scanners) 2D barcode scanners are required for 2D barcodes. All these characteristics and criteria must be taken into account when bar codes are to be used in a company.

Read more ...

Android-based LogiScan

How should a device be stored when it is not used for a long time?

For certain applications (e.g., inventory) the devices are used only once a year for a few days. If a device is not used for an extended period of time, appropriate precautions should be taken. The battery should be fully charged before storage and then removed from the device. The battery must be recharged after 12 months at the latest, as it will discharge itself during the rest period. Within three months, depending on the temperature, up to 80% of the charge will be lost. At high temperatures, the discharge is correspondingly faster. The ideal temperatures for an unused battery are between 15° C and 30° C. Large temperature fluctuations are generally detrimental to batteries and should be avoided.

How can I make a screenshot?

Press the power button and the button on the left side of the unit. When capturing the screenshot, a frame around the screen is displayed, a camera sound is emitted and an info is displayed in the notification bar. The screenshot file is stored in the directory Pictures/Screenshots.

What can I do if there are problems with wireless reception?

Install the app "Fritz WLAN" from the Google Playstore and start it.

Under the tab "Environment", you can see if there are other WLAN access points in the environment and which channels are used by them. Set up a channel on your WLAN access point that is still free (can be done at the WLAN access point with the appropriate administration tool) or on which a remote WLAN access point with a corresponding low signal strength is sent.

Under tab "My WLAN", the signal strength is recorded over time. When you move around with the unit in the room, you can check the reception in various places.

How can I extend the battery life?

The following power tips may help your device consume less power and thus be usable longer.

  • Decrease the display brightness.
  • Set the display timeout to the lowest possible value.
  • Disable permanent Internet connections.
  • Disable UMTS connections (WCDMA) if not needed.
  • Disable GPS, WLAN and Bluetooth when not needed.

How can I accept bar code or RFID data in the input field of an app?

The Android app devin can be used for this. Devin allows to transfer the data scanned by the barcode scanner or RFID reader of a LogiScan-15xx to the keyboard buffer or the clipboard of Android. Alternatively, a broadcast message is also possible. Thus, barcode scanners and RFID readers can serve as a data source for each app.

How can I install an Android app outside Google Playstore?

Android installation packages have the extension "apk". If you see such an Android installation packag file with the File Explorer or the Internet browser, the installation is started by tapping the file name.

How can I restart the device?

Press the power button until a menu appears. Select "Restart" from the menu.

What do I need to develop my own Android app?

As a development environment, Android Studio (can be downloaded free from the Android website). A description of Android Studio's main features includes the App Development for Android page.

The corresponding SDK is required for the relevant target platform. This can be downloaded from the product page of the respective device.

The Android app devin is available for LogiScan-15xx devices. This provides a convenient software interface to barcode and RFID readers. For a detailed description, refer to devin.

What is ADB?

The ADB (Android Debug Bridge) is a software interface between the PC and the Android device. The ADB allows direct communication between the two devices. This includes a file transfer function as well as the ability to run commands on the Android system via ADB and to access components of the system. The ADB can be started and operated via the Windows console "cmd". To be able to use ADB

  • under Settings→About device, tap Build number repeatedly (about 5 times) until "You are now a developer" appears,
  • under Settings→Developer Options→USB Debugging.
  • ADB to be installed on the PC. A freely available widespread ADB tool is e.g. "Minimal ADB and Fastboot".

What to do if the subdirectories of the "aitronic" directory are no longer displayed via MTP?

Delete the "storage" directory. This deletes all files generated from the database. However, the database is preserved.

Why can't I use my camera when devin is activated?

For communication with camera, bar code scanner and RFID reader is used by Android the same serial interface. If devin is activated, the relevant serial interface is switched to barcode scanners or RFID scanners. Therefore, Android can not access the camera. However, in order to make the camera available, the keycode of a key must be defined in devin under "Function → Disable devin via Key", which temporarily deactivate devin before the camera is used. As soon as one of the devin-defined scan buttons is pressed, the activation of devin is activated again.

What is the Android App ScannerDemo for?

The ScannerDemo app is used to demonstrate the integrated barcode scanner / RFID reader and includes functions such as scanner / RFID module on / off, scanning of barcodes / RFID tag and output of the scanned codes with the preceding type.

How can I exit the aiBrowser or other aitronic apps?

The aiBrowser and other aitronic apps can be exited by the appropriate admin menu function (the admin menu is password-protected).

Barcodes LogiScan-600/800/1100

How can I read barcodes with a LogiScan-600/800/1100 without special application?

  • Call up the system menu on the LogiScan-600/800/1100 (refer to corresponding FAQ).
  • Call menu function Test→Code/RF-ID. "Barcode Test" is displayed in the title line.
  • All barcode types activated in the scanner module can now be scanned. The corresponding barcode type is displayed.

Barcodes

How to avoid read errors when scanning barcodes of type Code 2/5 interleaved?

If this barcode type is set and no further check is carried out (neither by the scanner nor by the application), a very high error rate must be expected. The following measures should be taken:

  • If possible, use a check digit.
  • Use a length fixation. That means, only barcodes with one or two lengths are accepted by the scanner.
  • If there is a constant number of digits within the code, it should be checked by the application.

How do 1D and 2D Barcode Scanners differ?

  • 1D bar code scanners can only read 1D bar codes.
  • 2D barcode scanners can read 1D and 2-D bar codes.

Read more ...

Inquiry LogiScan-1710/Advarics

* Pflichtfelder