Notice:Dear customers, from August 24 to September 15, 2026, our office will only be reachable by phone between 08:00 and 14:00.

FAQ "DECT"

How can I read out the PP ID or the assigned FP IDs of the DECT module at the LogiScan-600/800/1100?

How can I read the FP-ID of the DECT module in the DECT access points?

On the PC, exit WinDECT and start DECTOR II.
Connect to the Access Point.
The FP ID of the DECT module is displayed in the field "Device ID" at the top left.

How can I set up a DECT network manually?

On the PC, exit WinDECT and start DECTOR II.
Use the DECTOR-II menu command Command> Clear all Subscription to reset all IPUI entries to 0.0.0.0.0.
After double-clicking on the respective line 1 ... 16, the PP ID of the radio scanner can be entered.
After entering all PP-ID, the FP-ID of the DECT access point must be entered manually into the mobile devices which are to communicate with this DECT-Accespoint.
Before launching the application program, which communicates with the mobile devices via the DECT access points (e.g., WINDECT), DECTOR II must be terminated.

How do I connect a LogiScan-600/800/1100 with DECT module to a DECT Access Point?

On the PC, exit WinDECT and start DECTOR II.
Connect to the Access Point.
Click the "On Air Subscription" button at the top left of the screen or execute the Command→Subscription on Air menu function.
On the mobile device, go to the system menu (see above).
Use MENU→Admin→DECT→SubsOnAir to start the subscription on air procedure.