Android Handheld

LogiScan-1750 UHF, front
LogiScan-1750 UHF, persp.
LogiScan-1750 UHF, side view

LogiScan-1750 UHF

Handheld with UHF RFID, NFC and Android 9.0

This rugged handheld computer with the Android 9 operating system, Qualcomm Octa-Core processor and QWERTY keyboard, has a replaceable 6700 mAh battery and an optional pistol grip with an extended 5200 mAh battery. With its data acquisition functions for barcodes, UHF RFID and NFC, this device can be used in the areas of logistics, warehousing, manufacturing, retail, etc.

++ The free apps devin for barcode and RFID management with Android apps and ScannerDemo (including source code) are already pre-installed and enabled on this device. These apps have been developed specifically for android-based LogiScan and can only be run on these devices.

  • Reader-1D
  • Reader-2D
  • RFID
  • WLAN
  • GPRS
  • USB
  • Bluetooth
  • GPS
  • Light-Sensor
  • Proximity-Sensor
  • Acceleration-Sensor
  • Camera
  • LTE-4G
  • IP67
PHYSICAL CHARACTERISTICS
Dimensions202.0 x 72.5 x 32.0 mm
Weight738 g (with pistol battery)
Display4-inch high definition full display, IPS LTPS 800 x 480
Battery6700 mAh removable main battery, 5200 mAh optional pistol battery, support QC3.0 and RTC; Built in 100mAh backup battery, supporting battery hot swap, improving reliability and ensuring user data security; Standby: up to 680 hours (only main battery ; WiFi: up to 560h; 4G: up to 560h); Continuous use: over 12 hours (depending on user environment); Charging time: 3.5 hours (charge device by standard adaptor and USB cable)
Touch PanelMulti-touch panel, gloves and wet hands supported (material-dependent)
SpeakerSupport
VibratorSupport
Microphone2 Microphones, 1 for noise reduction
InterfacesUSB 3.0, Type-C, OTG, extended thimble
Card slot1 slot for SIM card, 1 slot for TF card
KeypadMain keyboard: 37 keys; Side keys: 2 SCAN keys + 2 volume keys + 1 user-defined key
SensorsGravity sensor, proximity sensor, light sensor, accelerometer sensor, vibration motor
Indicator LED Power, charging, status indicator
USER ENVIRONMENT
Operating Temp.-20 ℃ to +50 ℃
Storage Temp.-40 ℃ to +70 ℃
Humidity5% RH to 95% RH (non condensing)
Drop SpecificationMultiple 1.8 m drops (at least 20 times) to the concrete across the operating temperature range
Tumble Specification1000 x 0.5 m falls at room temperature
SealingIP67 per IEC sealing specifications
ESD±15 KV air discharge, ±8 KV conductive discharge
DEVELOPING ENVIRONMENT
Operating SystemAndroid 9.0; GMS, 90-day security updates, Android Enterprise, Zero-Touch, FOTA, Soti MobiControl, SafeUEM supported
SDKChainway Software Development Kit
LanguageJava
ToolEclipse / Android Studio
PERFORMANCE
CPUQualcomm 1.8 GHz Octa-core
RAM+ROM3 GB + 32 GB; 4 GB + 64 GB (optional)
ExpansionSupports up to 128 GB Micro SD card
COMMUNICATION
WLANSupport 802.11 a/b/g/n/ac/d/e/h/i/k/r/v, 2.4G/5G dual-band, IPV4,IPV6, 5G PA; Fast roaming: PMKID caching, 802.11r, OKC; Operating Channels: 2.4G(channel 1~13), 5G(channel36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132, 136,140,144,149,153,157,161,165), Depends on local regulations; Security and Encryption: WEP, WPA/WPA2-PSK(TKIP and AES), WAPI- PSK—EAP-TTLS,EAP-TLS, PEAP-MSCHAPv2, PEAP-LTS,PEAP-GTC, etc.
WWAN (Europe, Asia)2G: 850/900/1800/1900MHz; 3G: CDMA EVDO: BC0, WCDMA: 850/900/1900/2100MHz, TD-SCDMA: A/F(B34/B39); 4G: B1/B3/B5/B7/B8/B20/B38/B39/B40/B41
Vo-LTESupport Vo-LTE HD video voice call
BluetoothBluetooth 4.2/4.1+HS/4.0/3.0+HS/2.1+EDR
GNSSGPS/AGPS, GLONASS, BeiDou, Galileo, internal antenna
UHF RFID
EngineCM710-1 module based on Impinj E710 CM2000-1 module based on Impinj Indy R2000
Frequency865 - 868 MHz / 920 - 925 MHz / 902 – 928 MHz
ProtocolEPC C1 GEN2 / ISO18000-6C
AntennaCircular Polarized Antenna (4 dBi)
Power1W (30 dBm, +5 dBm to +30 dBm adjustable)
R/W rangesUp to 15 m (open outdoors, Impinj MR6 tag)
Fastest Read Rate900+ tags/sec
Communication ModePin Connector
NoteRanges and rates depend on tags and environment
BARCODE SCANNING
2D Scanner ImagerZebra SE4750 MR
1D SymbologiesUPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
2D SymbologiesPDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
CAMERA
Rear CameraRear 13 MP Autofocus with flash
NFC
Frequency13.56 MHz
ProtocolISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
ChipsM1 card (S50, S70), CPU card, NFC tags, etc.
Range2 – 4 cm
Android Apps
Application Development
Communication Software
  • MTPWin

    MTPWin provides functions for configuration / synchronization of mobile android-based data entry devices of the series LogiScan with a Windows PC. This requires the integration of MTPWin functionality in the corresponding Android data acquisition app.

Barcodes Android-based LogiScan LogiScan-600/800/1100

We want to introduce barcode recognition in our company. Which barcode type should we choose?

The different barcode types differ in some cases substantially in terms of the character size, the information density, the max. Number of codable characters and security. While 1D barcodes can be read by almost all barcode readers (1D and 2D barcode scanners) 2D barcode scanners are required for 2D barcodes. All these characteristics and criteria must be taken into account when bar codes are to be used in a company.

Read more ...

Android-based LogiScan

How should a device be stored when it is not used for a long time?

For certain applications (e.g., inventory) the devices are used only once a year for a few days. If a device is not used for an extended period of time, appropriate precautions should be taken. The battery should be fully charged before storage and then removed from the device. The battery must be recharged after 12 months at the latest, as it will discharge itself during the rest period. Within three months, depending on the temperature, up to 80% of the charge will be lost. At high temperatures, the discharge is correspondingly faster. The ideal temperatures for an unused battery are between 15° C and 30° C. Large temperature fluctuations are generally detrimental to batteries and should be avoided.

How can I make a screenshot?

Press the power button and the button on the left side of the unit. When capturing the screenshot, a frame around the screen is displayed, a camera sound is emitted and an info is displayed in the notification bar. The screenshot file is stored in the directory Pictures/Screenshots.

What can I do if there are problems with wireless reception?

Install the app "Fritz WLAN" from the Google Playstore and start it.

Under the tab "Environment", you can see if there are other WLAN access points in the environment and which channels are used by them. Set up a channel on your WLAN access point that is still free (can be done at the WLAN access point with the appropriate administration tool) or on which a remote WLAN access point with a corresponding low signal strength is sent.

Under tab "My WLAN", the signal strength is recorded over time. When you move around with the unit in the room, you can check the reception in various places.

How can I extend the battery life?

The following power tips may help your device consume less power and thus be usable longer.

  • Decrease the display brightness.
  • Set the display timeout to the lowest possible value.
  • Disable permanent Internet connections.
  • Disable UMTS connections (WCDMA) if not needed.
  • Disable GPS, WLAN and Bluetooth when not needed.

How can I accept bar code or RFID data in the input field of an app?

The Android app devin can be used for this. Devin allows to transfer the data scanned by the barcode scanner or RFID reader of a LogiScan-15xx to the keyboard buffer or the clipboard of Android. Alternatively, a broadcast message is also possible. Thus, barcode scanners and RFID readers can serve as a data source for each app.

How can I install an Android app outside Google Playstore?

Android installation packages have the extension "apk". If you see such an Android installation packag file with the File Explorer or the Internet browser, the installation is started by tapping the file name.

How can I restart the device?

Press the power button until a menu appears. Select "Restart" from the menu.

What do I need to develop my own Android app?

As a development environment, Android Studio (can be downloaded free from the Android website). A description of Android Studio's main features includes the App Development for Android page.

The corresponding SDK is required for the relevant target platform. This can be downloaded from the product page of the respective device.

The Android app devin is available for LogiScan-15xx devices. This provides a convenient software interface to barcode and RFID readers. For a detailed description, refer to devin.

What is ADB?

The ADB (Android Debug Bridge) is a software interface between the PC and the Android device. The ADB allows direct communication between the two devices. This includes a file transfer function as well as the ability to run commands on the Android system via ADB and to access components of the system. The ADB can be started and operated via the Windows console "cmd". To be able to use ADB

  • under Settings→About device, tap Build number repeatedly (about 5 times) until "You are now a developer" appears,
  • under Settings→Developer Options→USB Debugging.
  • ADB to be installed on the PC. A freely available widespread ADB tool is e.g. "Minimal ADB and Fastboot".

What to do if the subdirectories of the "aitronic" directory are no longer displayed via MTP?

Delete the "storage" directory. This deletes all files generated from the database. However, the database is preserved.

Why can't I use my camera when devin is activated?

For communication with camera, bar code scanner and RFID reader is used by Android the same serial interface. If devin is activated, the relevant serial interface is switched to barcode scanners or RFID scanners. Therefore, Android can not access the camera. However, in order to make the camera available, the keycode of a key must be defined in devin under "Function → Disable devin via Key", which temporarily deactivate devin before the camera is used. As soon as one of the devin-defined scan buttons is pressed, the activation of devin is activated again.

What is the Android App ScannerDemo for?

The ScannerDemo app is used to demonstrate the integrated barcode scanner / RFID reader and includes functions such as scanner / RFID module on / off, scanning of barcodes / RFID tag and output of the scanned codes with the preceding type.

How can I exit the aiBrowser or other aitronic apps?

The aiBrowser and other aitronic apps can be exited by the appropriate admin menu function (the admin menu is password-protected).

Barcodes LogiScan-600/800/1100

How can I read barcodes with a LogiScan-600/800/1100 without special application?

  • Call up the system menu on the LogiScan-600/800/1100 (refer to corresponding FAQ).
  • Call menu function Test→Code/RF-ID. "Barcode Test" is displayed in the title line.
  • All barcode types activated in the scanner module can now be scanned. The corresponding barcode type is displayed.

Barcodes

How to avoid read errors when scanning barcodes of type Code 2/5 interleaved?

If this barcode type is set and no further check is carried out (neither by the scanner nor by the application), a very high error rate must be expected. The following measures should be taken:

  • If possible, use a check digit.
  • Use a length fixation. That means, only barcodes with one or two lengths are accepted by the scanner.
  • If there is a constant number of digits within the code, it should be checked by the application.

How do 1D and 2D Barcode Scanners differ?

  • 1D bar code scanners can only read 1D bar codes.
  • 2D barcode scanners can read 1D and 2-D bar codes.

Read more ...

LogiScan-600/800/1100 RFID

How can I set the transponder types to be read in the LogiScan-600/800/1100 in the RFID module?

When a LogiScan-600/800/1100 with RFID module is delivered, all transponder types are normally activated. If the transponder types in the RFID module are set by the application, a manual setting is not possible or will be overwritten by the next start of the application. If the transponder types are not set by the application, a manual configuration can be made as follows:

  • Connect the LogiScan-600/800/1100 to the desired COM port of the PC.
  • Call up the system menu on the LogiScan-600/800/1100 (see corresponding FAQ),
  • Call the Admin→System menu function and press SHIFT 9,
  • Select "RF-ID Port" and press ENTER,
  • Com0 (this is the normal RS-232 interface, which is also used for data transmission) and press ENTER.
  • Start the ACG Utility on the PC (can be downloaded from the product page).
  • Select and connect the appropriate COM port.
  • In the "Operation Mode" field, the desired transponder types can be activated / deactivated.
  • Clicking the button "Apply Settings" writes the settings to the RFID module.
  • Afterwards, the ACG Utility can be terminated and the application can be started on the LogiScan-600/800/1100.

How can I read transponder tags with a LogiScan-600/800/1100 without special application?

  • Call up the system menu on the LogiScan-600/800/1100 (see corresponding FAQ).
  • Call the menu function Test→Code/RF-ID. "Barcode test" is displayed in the title line.
  • Press SHIFT SCAN to switch to the RFID test. "Barcode test" is displayed in the title line.
  • Now all transponder tags activated in the RFID module can be read. The corresponding transponder type is displayed.

RFID

We want to introduce RFID technology in our company. For which operating frequency (125/134 kHz, 13.56 MHz or 868 MHz) should we choose?

The operating frequencies 125/134 kHz and 13.56 MHz are suitable for applications with low reading distances. If the transponder is only to be used for identification, a read-only transponder suffices. If data is to be stored in the transponder, a read-write transponder is necessary. The 125/134 kHz technique (LF) still distinguishes between read-only (read-only) and read-write transponders (chip has an additional data memory). This is historically, since the RFID development started with LF technology and these read-only chips were cheaper. At all other operating frequencies, there are now mostly read / write transponders.

The 125 kHz technique allows mobile devices to read distances up to 10 cm (depending on antenna and tag size.) Even if the transponder tags are attached to metal or embedded in it, automatic identification is possible Are, among other things, production control, object/goods identification in the metal environment, access control and animal identification.

13.56 MHz transponders enable the simultaneous reading of several transponders with their anti-collision technology. The range with mobile devices is however shorter than at 125/134 kHz and is max. Few centimeters. Areas of application are, inter alia, Production control, object/goods identification, access control, ticketing (e.g. public transport, events).

868-MHz tags (UHF) offer a high reading range of up to 10 meters, but the carrier material on which the tags are attached, as well as the contents of the packaging, have a great influence on the range. Areas of application are, inter alia, Production control with read distances greater than 2 meters, logistics, material flow (pallets etc.), object/goods identification (reusable and transport packaging).

How can I configure the transponder types to be read on the AT-120?

Use the AT-120 utility. The AT-120 instruction manual contains the appropriate description.